Embedding Cassettes and Storage
Electron Microscopy Sciences Embedding Capsule Holder
Fabricated form polypropylene, a direct substitution for the BEEM capsule holders. 15 positions. Fits embedding capsule size 00' (8.5 mm diameter). Sturdy, long lasting, and stackabe.
Electron Microscopy Sciences Gilder Standard Square 200 mesh Copper Grid
A reliable support specimen grid source. Features well-defined grid bars, maximum open area, and a matt/shiny side. Each grid is individually inspected. 3.05 mm diameter, 0.7 mil (18 um) thickness.
Grid: Copper
Pitch: 125 µm
Hole: 90 µm
Bar: 35 µm
:
Electron Microscopy Sciences Gilder Hexagonal 300 mesh Copper Grid
A reliable support specimen grid source. Features: well-defined grid bars, maximum open area, and a matt/shiny side. Each grid is individually inspected. The copper grids with palladium plating offers better grid strength and avoids tarnishing. 3.05 mm diameter, 0.7 mil (18um) thickness.
Grid: Copper
Pitch: 83 µm
Hole: 58 µm
Bar: 25 µm
Electron Microscopy Sciences PTFE Flat Embedding Mold Set
The PTFE Flat Embedding Mold offers flat embedding for most resins, including LR White, LR Gold, JB-4, Immuno-Bed and Lowicryl and can be used for both UV/low temperature and thermal cure. It may be used as a substitution for the silicone molds. The individual cavities are pre shaped to reduce block trimming.
For curing anaerobic material, we recommend using Aclar film, cut-to-size of the mold and lower on top of the mold after you ʽjust over-fill' the cavities with embedding resin. Due to the flexibility of the PTFE, you just bend the mold to pop out the cured resin blocks. After all the cast blocks have been removed, reinsert the mold to its holder to re-shape the mold.
The mold holder is machined from aluminum and anodized black. Each of the 18 cavities measures 5 mm W x 14 mmL x 4 mm deep. Overall mold measures: 5 1/2" x 3" x 1/4” (140x50x8 mm).
Electron Microscopy Sciences Embedding Capsule Holder
Fabricated form polypropylene, a direct substitution for the BEEM capsule holders. 15 positions. Fits embedding capsule size 00' (8.5 mm diameter). Sturdy, long lasting, and stackabe.
Electron Microscopy Sciences EMS Replacement Paraffin Tapper, 13 x 12 mm, 1.5 mm thick
Paraffin tappers hold the heat so the tissue stays flat in the mold and is embedded in the same plane for easier cutting. The paraffin tappers are helpful with multiple piece skins, large pieces of uterus, and even those multi-piece biopsies. They reduce re-cuts and re-embeds, as the tissue is perfectly embedded in the embedding mold the first time.
Size: 13 x 12 mm
Thickness: 1.5 mm
Electron Microscopy Sciences Histo-Container White, 2L, 120 mm height, 184 mm I.D.
For the storage and transport of histology specimens, these containers are made from durable polypropylene and have leak proof seal caps. Supplied with snap-top lids and bucket carry handles and without graduations.
Capacity: 2L
Height: 120 mm
I.D.: 184 mm
Electron Microscopy Sciences Wafer-Mount™ 559
Available in sheet form 10"x10" (254x254 mm). To use, remove the paper backing exposing the adhesive layer. The substrate is positioned on the film and pressed down firmly so that it adheres to the plastic film. No heating is required. The wafer mounted on the plastic film can then be held down using a vacuum manifold or mechanical means for dicing or scribing. After dicing or scribing, the parts can be separated from the wafer-mount 559 film by washing in acetone or MEK. Ideal for holding down silicon wafers, alumina, or glass substrates for scribing.
Electron Microscopy Sciences Plastic Tissue Capsule
Plastic tissue capsules molded from polyethylene and resistant to all processing chemicals, including Zenker's Fixative. A three-compartment divider which is removable for specimens up to 35 mm. A weighted end floats the capsule in a upright position to conserve space. Perforated on the top and bottom for better circulation of the fluid. Snap-on hinged cover.
MSE Supplies LLC 2 IN SAPPHIRE WAFER APLANE (11
2 in Sapphire Wafer Aplane(11-20) SingleCrystal Al2O3, SSP
Electron Microscopy Sciences Standard Hexagonal Mesh, Material: Copper. Pitch: 500 µm. Hole: 430 µm. Bar: 70 µm., 100/PK
A reliable support specimen grid source. Features: well-defined grid bars, maximum open area, and a matte/shiny side. Each grid is individually inspected. 3.05 mm diameter, 0.7 mil (18 um) thickness. Material: Copper. Pitch: 500 µm . Hole: 430 µm . Bar: 70 µm.
Electron Microscopy Sciences Transparent Wafer Container Single, 1.5", Polypropylene Material, 48 x 10 mm
The carriers are used for storage and or shipping wafers. They prevent all types of damage and contamination to the wafer during shipping and even storage. Each of the containers are packed in 1000 class clean room and bag. The set includes the Container , the cover and the spring. Boxes are transparent and made from Anti-Electrostatic Polycarbonate.
Use: 1.5" (38mm)
Material: Polypropylene
Dimensions: 48 x 10 mm
Electron Microscopy Sciences Gilder Standard Square 200 mesh Copper Grid
A combination of thin and thick bar grids, with a mark on the rim for orientation.
Grid: Copper
Pitch: 125 µm
Hole: 95 µm
Bar: 35-25 µm
: